How to make air turn your home into a comfortable place
The quality of the air
Air is essential for the existence of living beings. In the case of people, it also requires conditions that guarantee hygiene and a state of well-being inside a home. The outdoor air is primarily composed of two elements, Oxygen and Nitrogen, as well as other gases in different proportions such as Carbon Monoxide (CO), Carbon Dioxide (CO2), Sulfur Dioxide (SO2), and Methane (CH4). When these gases do not exceed the values indicated below, the air is considered clean:- Carbon Monoxide (CO): maximum 1,000 micrograms/m3
- Carbon Dioxide (CO2): maximum 65.E-4 micrograms/m3
- Sulfur Dioxide (SO2): maximum 25 micrograms/m3
- Methane (CH4): maximum 650 micrograms/m3
The speed of air
Although it may seem otherwise, air is not a mass of stationary gases, but rather constitutes a thin fluid, turbulent layer constantly moving with a speed that varies depending on the thermal contrasts near the Earth's surface. The massive displacement of large portions of air with a certain speed and common direction is called wind. In turn, the absence of wind near the ground is called calm. The human body has a special ability to perceive air movement, which significantly impacts comfort within an enclosed space. Moving air decreases our thermal sensation in summer, making it a great "refrigerant" for the months in which temperatures are highest. Air displacement at a speed of 0.5 m/s is already slightly perceptible to the human body. The term "calm air" implies movement of up to 0.8 m/s. From this value onwards, the movement of air is perfectly perceived.The speed of air significantly influences people's comfort, mainly for two reasons: the impact when it collides with them and the noise it produces. In the first case, as previously mentioned, greater cooling occurs due to the air current, allowing a person to feel a lower temperature. The values of air speed in relation to people's well-being can be summarized in the following values:
- Speed of 0 to 0.08 m/s: stagnant air. It produces no effect on the body except for the absence of air.
- Speed of 0.12 m/s: ideal situation, very favorable for cooling areas where high temperatures concentrate.
- Speed of 0.35 m/s: air movement is quite high. It is not recommended in places like offices as it can move small objects like sheets of paper.
- Speed of 0.40 to 1.5 m/s: very high displacement levels. This is the speed of air used for ventilation and air conditioning systems in large spaces.
Siber Ventilation
Manufacturer of High Energy Efficiency Ventilation Systems. Siber provides a set of high energy efficiency solutions in wind and mechanically intelligent ventilation, improving the Health, Hygiene, and Comfort of people, being respectful of the environment.
Related posts
Efficient rehabilitation
clean air
fan
extractor
inflate
exchanger
clean air
extractor
inflate
fan
exchanger
How to blow and how to extract air in indoor spaces
Discover how to blow using natural and mechanical air intake with mechanical extraction
clean air
air quality
Health and comfort
Allergies
How do spores affect our health?
Spores are microscopic bodies that participate in the reproduction of organisms such as fungi, plants, or algae.
acoustic isolation
pollution
Ventilation regulations
ventilation
ventilation
acoustic isolation
pollution
CTE HR Why is the Technical Code so demanding in matters of noise protection?
The CTE HR is concerned with the comfort of people, which depends on the quality of the indoor environment, that is, the quality of air and acoustic insulation.